Model 91 catalytic is our most poplular selling wood stove. Majestic in appearance and performance it is the ultimate in wood stoves. The Model 91 used as a masonry fireplace insert or as a freestanding unit easily accepts 23″ logs and heats up to 3200 square feet with an astonishing 50,400 BTU’s per hour. Features include a factory installed blower, high efficiency heat exchanger, ash removal tray and oversized glass door with air wash system.
STOVE DIMENSIONS:
34-1/4" W x 23-3/16" H x 28-7/8" D
STOVE WEIGHT: 620 Lbs
CUBIC FEET FIREBOX VOLUME: 4.4
FIREWOOD LENGTH:
22" (front to back) 23"(side to side)
ASHPAN: YES
MINIMUM FIREPLACE DIMENSIONS:
23-1/2" H x 31-3/4" W x 15-1/2" D
9" and 12" Surround panels available
Oversized Chimneys installations require full length Stainless Steel Liner kit
BLOWER: YES included
FLUE SIZE: 8"
HEARTH PAD SIZE: 50" W x 54" D
FREESTANDING CLEARANCE TO COMBUSTIBLES:
16" (Corner)* - 23" (Rear) - 24" (Side)
HEAT CAPACITY: 1,800 - 3,200 Sq. Feet
EFFICIENCY: 86%
EPA Tested Output BTU/H: 50,400
EMISSIONS G/H: 1.2
OPTIONAL PEDESTAL: YES (8"H)
PRE-FAB APPROVED: NO
MOBILE HOME APPROVED: NO
*The clearances listed may be reduced. Check owner's manual for details or follow NFPA-211 code if available.
**Model 91 is tested with only double wall pipe.
***Hearth pad size listed is the minimum size required for vertical vent installations.
Heating capacities, weight and efficiency are approximations only. The actual performance of the unit may vary depending on climate, condition and type of wood used, stove location, burn rate, accessories chosen, home layout and insulation, ceiling heights, and how the unit is operated. All styles, colors, options, features and sizes are subject to change without notice. Stone fireplaces, large flues, double flues & fireplaces with existing ash dump may require optional direct connect kits. See dealer for details. All Buck Wood Stoves, fireplace inserts and freestanding stoves are tested and listed to UL Standards by ITC (Warnock Hersey/Intertek).
 
|
